Carat XBC V2 Single Deck Case

\n

Zaprezentowujemy nowo zaprojektowany Carat XBC v2 Single Deck Case przeznaczony do pomieszczenia większych, bardziej luksusowych tuck boxów Card Mafia dla serii Avenger, w tym najnowszych dek Dr. Strange i Black Panther.

\n

\n
• Stosowany z 3mm i 5mm akrylu archiwalnej jakości do bezobstrukcyjnego widoku swojej ulubionej deki z każdej strony oraz bezpieczeństwa jej przechowywania.
\n
• Rozmiary zewnętrznego przypadku pozostają takie same jak w oryginalnym Carat XBC (11,5cm x 9,0cm x 4,2cm), ale boki krótkie zastąpione są płytami z 3mm akrylu, co dodaje 4mm do rozmiarów wewnętrznych (od 10,5cm do 10,9cm).
\n
• Brzegi bevelowane i krawędzie zaokrąglone dla eleganckiego wygląd i czułość.
\n
• Lidka przylega do tylnego panelu przez 4 pary magnetyk neodymowych, które są 10 razy silniejsze niż zwykłe magnetyki, zapewniając bezpieczne przyklejenie podczas pozwalania na łatwe dostęp do deki.
\n
• Wnętrze dodatkowe z wymiarami 8,0cm x 3,2cm do wypełnienia, jeśli wydaje się, że jest nieco więcej miejsca. Wraz z tym dostarczono 4 padki z przylepem do podstawy przypadku do zapobiegania szramom na dekach lub powierzchniach.
\n

\n

Carat Card Cases od Carat Case Creations są ulubienicami kolekcjonerów, projektantów i producentów kart do gry. Carat Case Creations współpracował z wieloma wiodącymi projektantami i firmami tworzącymi niestandardowe przypadki, w tym: Butterfly Playing Cards, Cartamundi, Chris Ovdiyenko, Expert Playing Card Co, Jackson Robinson, Lee Asher, Midnight Playing Cards, Mint Playing Cards, Rick Davison, Stockholm 17, Thirdway Industries, Tru-Card i Vanda Playing Cards.\n\n

Oryginalny opis angielski

Introducing the newly re-designed Carat XBC v2 Single Deck Case made to accommodate the larger, more luxurious tuck boxes by Card Mafia for their Avenger series, including the recently released Dr. Strange and Black Panther decks.

The Carat XBC v2 Single Deck Case is made of clear 3mm and 5mm archival quality acrylic to allow for unobstructed views of your favorite deck from all sides while safely protecting it from potential damage or harm.

The exterior dimensions of the case is still the same as the original Carat XBC (11.5cm x 9.0cm x 4.2cm), but the short sides of the case have been replaced by 3mm acrylic plates, effectively adding an additional 4mm height to the internal dimensions (from 10.5cm to 10.9cm).

As with all Carat Cases, the edges are beveled and the corners are rounded for a more elegant look and feel.

The case lid is attached by 4 neodymium magnet pairs, which are 10 times stronger than regular magnets, for a secure attachment while still allowing for easy access to the deck inside.

A 3mm insert with dimensions 8.0cm x 3.2cm is provided to fill in space if it is felt that there is a little extra room in the case. Also included are 4 rubber pads with adhesive that can be attached to the bottom of the case to prevent scratching of the case or the surface it is on.

Carat Card Cases by Carat Case Creations are the preferred playing card storage and display cases of discriminating collectors, designers and playing card manufacturers. Carat Case Creations has worked with many of the top designers and companies to create custom cases, including; Butterfly Playing Cards, Cartamundi, Chris Ovdiyenko, Expert Playing Card Co, Jackson Robinson, Lee Asher, Midnight Playing Cards, Mint Playing Cards, Rick Davison, Stockholm 17, Thirdway Industries, Tru-Card and Vanda Playing Cards.

HIGHLIGHTS

• Clear archival quality acrylic for unobstructed views from all sides and safe storage of valuable decks
• Beveled edges and rounded corners for an elegant look and feel
• 4 neodymium magnet pairs to keep the back panel strongly attached while allowing for easy access to insert/remove decks
• 4 rubber pads with adhesive included to place on the bottom of the case for protection of surfaces if needed

PRODUCT SPECIFICATIONS

• Materials used: 3mm and 5mm archival quality clear acrylic and neodymium magnets
• Dimensions:
  Internal - 10.9cm x 8.0cm x 3.2cm
  External - 11.5cm x 9.0cm x 4.2cm
• Additional item(s): One (1) 3mm insert with dimensions (8.0cm x 3.2cm) and 4 rubber pads with adhesive to apply to bottom of case if needed

NOTE: Deck is not included.

Oryginalny opis angielski

Introducing the newly re-designed Carat XBC v2 Single Deck Case made to accommodate the larger, more luxurious tuck boxes by Card Mafia for their Avenger series, including the recently released Dr. Strange and Black Panther decks.

The Carat XBC v2 Single Deck Case is made of clear 3mm and 5mm archival quality acrylic to allow for unobstructed views of your favorite deck from all sides while safely protecting it from potential damage or harm.

The exterior dimensions of the case is still the same as the original Carat XBC (11.5cm x 9.0cm x 4.2cm), but the short sides of the case have been replaced by 3mm acrylic plates, effectively adding an additional 4mm height to the internal dimensions (from 10.5cm to 10.9cm).

As with all Carat Cases, the edges are beveled and the corners are rounded for a more elegant look and feel.

The case lid is attached by 4 neodymium magnet pairs, which are 10 times stronger than regular magnets, for a secure attachment while still allowing for easy access to the deck inside.

A 3mm insert with dimensions 8.0cm x 3.2cm is provided to fill in space if it is felt that there is a little extra room in the case. Also included are 4 rubber pads with adhesive that can be attached to the bottom of the case to prevent scratching of the case or the surface it is on.

Carat Card Cases by Carat Case Creations are the preferred playing card storage and display cases of discriminating collectors, designers and playing card manufacturers. Carat Case Creations has worked with many of the top designers and companies to create custom cases, including; Butterfly Playing Cards, Cartamundi, Chris Ovdiyenko, Expert Playing Card Co, Jackson Robinson, Lee Asher, Midnight Playing Cards, Mint Playing Cards, Rick Davison, Stockholm 17, Thirdway Industries, Tru-Card and Vanda Playing Cards.

HIGHLIGHTS

• Clear archival quality acrylic for unobstructed views from all sides and safe storage of valuable decks
• Beveled edges and rounded corners for an elegant look and feel
• 4 neodymium magnet pairs to keep the back panel strongly attached while allowing for easy access to insert/remove decks
• 4 rubber pads with adhesive included to place on the bottom of the case for protection of surfaces if needed

PRODUCT SPECIFICATIONS

• Materials used: 3mm and 5mm archival quality clear acrylic and neodymium magnets
• Dimensions:
  Internal - 10.9cm x 8.0cm x 3.2cm
  External - 11.5cm x 9.0cm x 4.2cm
• Additional item(s): One (1) 3mm insert with dimensions (8.0cm x 3.2cm) and 4 rubber pads with adhesive to apply to bottom of case if needed

NOTE: Deck is not included.