Carat XBC V2 Single Deck Case

\n

Introducing der neu überarbeiteten Carat XBC v2 Single Deck Case, entwickelt um die größeren und luxuriöseren Versteckkästen von Card Mafia für ihre Avenger-Reihe zu beherbergen, einschließlich den kürzlich veröffentlichten Dr. Strange und Black Panther Decks.

\n

\n
• Mit klarer 3mm- und 5mm-dicken archivqualitätsklarer Acrylkunststoffglas für ungestörte Sicht auf Ihre Lieblingsdecks, während sie sicher vor Schäden geschützt sind.
\n
• Die äußeren Maße des Kases sind immer noch die gleichen wie beim ursprünglichen Carat XBC (11.5cm x 9.0cm x 4.2cm), aber die kurzen Seiten wurden durch 3mm-dicke Acrylplatte ersetzt, was die inneren Maße um 4mm erhöht (von 10.5cm auf 10.9cm).
\n
• Die Kanten sind gebeult und die Ecken runden für einen eleganten Look und Gefühl.
\n
• Das Deckende wird durch 4 Paare neodymierte Magnete befestigt, die 10-mal stärker als normale Magnete sind, um eine sichere Anbringung zu gewährleisten, während sie gleichzeitig den Zugang zum Deck ermöglichen.
\n
• Eine 3mm-Insertion mit Maßen 8.0cm x 3.2cm wird bereitgestellt, um zusätzliche Raum im Kasten auszufüllen, falls nötig. Zudem sind 4 Reibefedern mit Klebeverbindungen beiliegender, die an der Unterseite des Kases angebracht werden können, um Schäden am Kasten oder dem darunterliegenden Material zu vermeiden.
\n

\n

Carat Card Cases von Carat Case Creations sind die bevorzugten Spielkarten-Speicher- und Anzeigekästen für anspruchsvolle Sammler, Designer und Spielkartenhersteller. Carat Case Creations hat mit vielen der führenden Designer und Unternehmen zusammengearbeitet, um benutzerdefinierte Kästen zu erstellen, einschließlich Butterfly Playing Cards, Cartamundi, Chris Ovdiyenko, Expert Playing Card Co., Jackson Robinson, Lee Asher, Midnight Playing Cards, Mint Playing Cards, Rick Davison, Stockholm 17, Thirdway Industries, Tru-Card und Vanda Playing Cards.\n\n

Originale englische Beschreibung

Introducing the newly re-designed Carat XBC v2 Single Deck Case made to accommodate the larger, more luxurious tuck boxes by Card Mafia for their Avenger series, including the recently released Dr. Strange and Black Panther decks.

The Carat XBC v2 Single Deck Case is made of clear 3mm and 5mm archival quality acrylic to allow for unobstructed views of your favorite deck from all sides while safely protecting it from potential damage or harm.

The exterior dimensions of the case is still the same as the original Carat XBC (11.5cm x 9.0cm x 4.2cm), but the short sides of the case have been replaced by 3mm acrylic plates, effectively adding an additional 4mm height to the internal dimensions (from 10.5cm to 10.9cm).

As with all Carat Cases, the edges are beveled and the corners are rounded for a more elegant look and feel.

The case lid is attached by 4 neodymium magnet pairs, which are 10 times stronger than regular magnets, for a secure attachment while still allowing for easy access to the deck inside.

A 3mm insert with dimensions 8.0cm x 3.2cm is provided to fill in space if it is felt that there is a little extra room in the case. Also included are 4 rubber pads with adhesive that can be attached to the bottom of the case to prevent scratching of the case or the surface it is on.

Carat Card Cases by Carat Case Creations are the preferred playing card storage and display cases of discriminating collectors, designers and playing card manufacturers. Carat Case Creations has worked with many of the top designers and companies to create custom cases, including; Butterfly Playing Cards, Cartamundi, Chris Ovdiyenko, Expert Playing Card Co, Jackson Robinson, Lee Asher, Midnight Playing Cards, Mint Playing Cards, Rick Davison, Stockholm 17, Thirdway Industries, Tru-Card and Vanda Playing Cards.

HIGHLIGHTS

• Clear archival quality acrylic for unobstructed views from all sides and safe storage of valuable decks
• Beveled edges and rounded corners for an elegant look and feel
• 4 neodymium magnet pairs to keep the back panel strongly attached while allowing for easy access to insert/remove decks
• 4 rubber pads with adhesive included to place on the bottom of the case for protection of surfaces if needed

PRODUCT SPECIFICATIONS

• Materials used: 3mm and 5mm archival quality clear acrylic and neodymium magnets
• Dimensions:
  Internal - 10.9cm x 8.0cm x 3.2cm
  External - 11.5cm x 9.0cm x 4.2cm
• Additional item(s): One (1) 3mm insert with dimensions (8.0cm x 3.2cm) and 4 rubber pads with adhesive to apply to bottom of case if needed

NOTE: Deck is not included.

Originale englische Beschreibung

Introducing the newly re-designed Carat XBC v2 Single Deck Case made to accommodate the larger, more luxurious tuck boxes by Card Mafia for their Avenger series, including the recently released Dr. Strange and Black Panther decks.

The Carat XBC v2 Single Deck Case is made of clear 3mm and 5mm archival quality acrylic to allow for unobstructed views of your favorite deck from all sides while safely protecting it from potential damage or harm.

The exterior dimensions of the case is still the same as the original Carat XBC (11.5cm x 9.0cm x 4.2cm), but the short sides of the case have been replaced by 3mm acrylic plates, effectively adding an additional 4mm height to the internal dimensions (from 10.5cm to 10.9cm).

As with all Carat Cases, the edges are beveled and the corners are rounded for a more elegant look and feel.

The case lid is attached by 4 neodymium magnet pairs, which are 10 times stronger than regular magnets, for a secure attachment while still allowing for easy access to the deck inside.

A 3mm insert with dimensions 8.0cm x 3.2cm is provided to fill in space if it is felt that there is a little extra room in the case. Also included are 4 rubber pads with adhesive that can be attached to the bottom of the case to prevent scratching of the case or the surface it is on.

Carat Card Cases by Carat Case Creations are the preferred playing card storage and display cases of discriminating collectors, designers and playing card manufacturers. Carat Case Creations has worked with many of the top designers and companies to create custom cases, including; Butterfly Playing Cards, Cartamundi, Chris Ovdiyenko, Expert Playing Card Co, Jackson Robinson, Lee Asher, Midnight Playing Cards, Mint Playing Cards, Rick Davison, Stockholm 17, Thirdway Industries, Tru-Card and Vanda Playing Cards.

HIGHLIGHTS

• Clear archival quality acrylic for unobstructed views from all sides and safe storage of valuable decks
• Beveled edges and rounded corners for an elegant look and feel
• 4 neodymium magnet pairs to keep the back panel strongly attached while allowing for easy access to insert/remove decks
• 4 rubber pads with adhesive included to place on the bottom of the case for protection of surfaces if needed

PRODUCT SPECIFICATIONS

• Materials used: 3mm and 5mm archival quality clear acrylic and neodymium magnets
• Dimensions:
  Internal - 10.9cm x 8.0cm x 3.2cm
  External - 11.5cm x 9.0cm x 4.2cm
• Additional item(s): One (1) 3mm insert with dimensions (8.0cm x 3.2cm) and 4 rubber pads with adhesive to apply to bottom of case if needed

NOTE: Deck is not included.