Carat X4X3 Twelve Deck Case

\n

Das Carat X4x3 Deck Case ermöglicht das Anzeigen von 12 Lieblingsdecks in drei Reihen von vier. Es besteht aus klarem, archivwertigem Acrylglas mit einer Dicke von 5mm, um unbeeinträchtigte Ansichten von allen Seiten und sichere Lagerung wertvoller Decks zu gewährleisten. Die Kanten sind abgerundet und die Ecken runder für einen eleganten Look und Gefühl.

\n

Die Decke wird durch zwölf neodymierte Magnete mit einem 10-fachen Magnetisierungsgrad an der Rückseite befestigt, was eine sichere Anpassung ermöglicht, während gleichzeitig einfache Zugriff auf die Decks gewährleistet ist. Aufgrund des Formats der Decke wurde sie verglichen zu anderen Carat Cases angepasst und befindet sich zwischen den längeren Seiten des Kases halb eingesunken, sodass sie nicht so leicht abfällt.

\n

Inklusive sind neun 3mm- und neun 5mm-Inserts zur Verwendung als Platzhalter zwischen Decks oder um die Decks in Gruppen zu halten. Zudem befinden sich vier Korkplatten mit Klebeverbindlichkeiten am Boden des Kases, um Schäden an den Decks oder der Unterlage zu vermeiden.

\n

Carat Card Cases von Carat Case Creations sind die bevorzugten Spielkartenlager- und Anzeigekästen für anspruchsvolle Sammler und Designer. Carat Case Creations hat mit vielen Top-Designer und Druckern zusammengearbeitet, um anpassbare Kästen zu erstellen, einschließlich Butterfly Playing Cards, Cartamundi, Expert Playing Cards, Kings Wild Project, Rick Davidson, Midnight Playing Cards, Mint Playing Cards, Stockholm 17, Thirdway Industries und Vanda Playing Cards.

\n

\n
• Anzeigt 12 Decks in drei Reihen von vier
\n
• Klarem archivwertigem Acrylglas mit unbeeinträchtigter Sicht von allen Seiten und sichere Lagerung wertvoller Decks
\n
• Abgerundete Kanten und runder Ecken für einen eleganten Look und Gefühl
\n
• 8 neodymierte Magnete mit einem 10-fachen Magnetisierungsgrad, um die Rückseite stark befestigt zu halten, während gleichzeitig einfacher Zugriff auf Decks ermöglicht wird
\n
• Neun (9) 3mm- und neun (9) 5mm-Inserts zur Verwendung als Platzhalter zwischen Decks oder an den Seiten der Decks, um die Decks in Gruppen zu halten
\n
• Vier Korkplatten mit Klebeverbindlichkeiten am Boden des Kases für Schutz von Decks und Unterlage
\n

\n\n

Originale englische Beschreibung

The Carat X4x3 Deck Case allows you to display 12 of your favorite decks in three rows of four. It is made of clear 5mm archival quality acrylic to allow for unobstructed views of your favorite decks from all sides while safely protecting them from potential damage or harm.

The case edges are beveled and the corners are rounded for a more elegant look and feel.

The lid attached by twelve neodymium magnet pairs, which are 10 times stronger than regular magnets, for a secure attachment while still allowing for easy access to the decks inside. Due to the size of the lid, it has been modified compared to other Carat Cases and is receded between the longer sides of the case, so it is partially locked in place and does not slide off as easily.

Also included are nine 3mm and nine 5mm inserts to use as spacers between your decks (or to keep them grouped together) as well as four rubber pads with adhesive that can be attached to the bottom of the case to prevent scratching of the case or the surface it is on.

Carat Card Cases by Carat Case Creations are the preferred playing card storage and display cases of discriminating collectors and designers. Carat Case Creations has worked with many of the top designers and printers to create custom cases, including, Butterfly Playing Cards, Cartamundi, Expert Playing Cards, Kings Wild Project, Rick Davidson, Midnight Playing Cards, Mint Playing Cards, Stockholm 17, Thirdway Industries and Vanda Playing Cards.

HIGHLIGHTS

• Displays 12 Decks in three rows of four
• Clear archival quality acrylic for unobstructed views from all sides and safe storage of valuable decks
• Beveled edges and rounded corners for an elegant look and feel
• 8 neodymium magnet pairs to keep the back panel strongly attached while allowing for easy access to insert/remove decks
• Nine (9) 3mm and nine (9) 5mm inserts to use as spacers in between decks or on the sides of the decks to keep the decks grouped together
• 4 rubber pads with adhesive included to place on the bottom of the case for protection of surfaces if needed

PRODUCT SPECIFICATIONS

• Materials used: 5mm archival quality clear acrylic and neodymium magnets
• Dimensions:
  Internal - three (3) rows of 27.8cm x 9.4cm x 2.2cm
  External - 28.8cm x 30.2cm x 3.2cm
• Additional Item(s): nine (9) 3mm inserts, nine (9) 5mm inserts and 4 rubber pads with adhesive to apply to bottom of case if needed

Originale englische Beschreibung

The Carat X4x3 Deck Case allows you to display 12 of your favorite decks in three rows of four. It is made of clear 5mm archival quality acrylic to allow for unobstructed views of your favorite decks from all sides while safely protecting them from potential damage or harm.

The case edges are beveled and the corners are rounded for a more elegant look and feel.

The lid attached by twelve neodymium magnet pairs, which are 10 times stronger than regular magnets, for a secure attachment while still allowing for easy access to the decks inside. Due to the size of the lid, it has been modified compared to other Carat Cases and is receded between the longer sides of the case, so it is partially locked in place and does not slide off as easily.

Also included are nine 3mm and nine 5mm inserts to use as spacers between your decks (or to keep them grouped together) as well as four rubber pads with adhesive that can be attached to the bottom of the case to prevent scratching of the case or the surface it is on.

Carat Card Cases by Carat Case Creations are the preferred playing card storage and display cases of discriminating collectors and designers. Carat Case Creations has worked with many of the top designers and printers to create custom cases, including, Butterfly Playing Cards, Cartamundi, Expert Playing Cards, Kings Wild Project, Rick Davidson, Midnight Playing Cards, Mint Playing Cards, Stockholm 17, Thirdway Industries and Vanda Playing Cards.

HIGHLIGHTS

• Displays 12 Decks in three rows of four
• Clear archival quality acrylic for unobstructed views from all sides and safe storage of valuable decks
• Beveled edges and rounded corners for an elegant look and feel
• 8 neodymium magnet pairs to keep the back panel strongly attached while allowing for easy access to insert/remove decks
• Nine (9) 3mm and nine (9) 5mm inserts to use as spacers in between decks or on the sides of the decks to keep the decks grouped together
• 4 rubber pads with adhesive included to place on the bottom of the case for protection of surfaces if needed

PRODUCT SPECIFICATIONS

• Materials used: 5mm archival quality clear acrylic and neodymium magnets
• Dimensions:
  Internal - three (3) rows of 27.8cm x 9.4cm x 2.2cm
  External - 28.8cm x 30.2cm x 3.2cm
• Additional Item(s): nine (9) 3mm inserts, nine (9) 5mm inserts and 4 rubber pads with adhesive to apply to bottom of case if needed